Chiptonex Viper RGB Mid Tower Gaming Cabinets
About this item
- Motherboard support – ATX, Mini ATX, Micro ITX
- 4 x 120 mm Preinstalled ARGB fans,
- The tempered glass panel on the side panel
- Rgb controller with motherboard sync and remote control
- It supports 2 x 3.5 HDD , 2 x 2.5 SSD
Viper RGB Mid Tower Cabinet comes with 4 preinstall 120mm ARGB fans.
All fans have RGB and you can see 3 fans on the front panel and one on the rear, with these fans you can see a controller that supports up to 10 fans that control the RGB by Motherboard Sync. The tempered glass is fit perfectly and gives a premium look it is an edge-to-edge tempered glass on the front and also side panel.
The tempered give the case a unique outlook and various options to show off and make your component visible to all which give a premium look. The Gaming Cabinet supports the 240 mm liquid radiator on the front and supports the motherboard ATX/Micro-ATX and the Max VGA Length is 315 mm.
You can add a CPU Cooler Height is 160mm. You can add two 3.5 HDD drives on the bottom of the cabinet on the backside which you can handle by screws use to fix the hard disk. If you want to fix the power supply first you need to fix the HDD then you can fix the power supply on the bottom of the case.
The Chiptronex VIPER RGB Mid tower Cabinet comes with preinstalled four 120mm ARGB fans. Three fans on the front panel and one on the rear and also has a controller which supports up to 10 fans(6pin) for RGB control by Motherboard Sync. It has 5mm thick edge-to-edge tempered glass on the front and side panel which give the case a unique outlook and various options to show off your build inside. It supports a 240 mm liquid radiator on the front. It supports motherboard ATX/Micro -ATX/ Mini ATX. Max VGA Length is 315 mm and Max CPU Cooler Height is 160 mm.
The VIPER RGB will support up to two 3.5 HDD bays on the bottom of the case from the backside with the help of the handy screws the Hard disk should be fixed. The hard disk should be fixed before fixing the power supply and the power supply will be fixed securely at the bottom of the case
The VIPER RGB can support a Maximum VGA card length is 315mm and a maximum CPU cooler height is 160 mm, the case supports two 2.5 SSD on the side
PREINSTALLED 4 ARGB FAN WITH MOTHERBOARD SYNC AND REMOTE CONTROL
The VIPER RGB comes with 4 pre-installed 120mm ARGB fans. Three fans on the front and one on the rear which comes with RGB Controller which supports up to 10 fans and with 3 pin ARGB header to control the LEDs with motherboard software and it has a dedicated RGB Remote control which uses to control the fans and led using the remote control
TEMPERED GLASS PANEL
The case comes with a 4mm edge to edge tempered glass side panel which gives the case a premium look
The VIPER RGB can support up to 240mm Radiator on the front, and 120mm on rear
COOLING FANS SUPPORT
The VIPER RGB mid-tower ATX case can support
It has 1 x USB 3.0, 2 x USB 2.0, Audio In/Out, and Reset button
3 PIN RGB HEADER
The Case comes with a 3 pin RGB header which helps to control the RGB color mode using motherboard software. the 3 Pin RGB header will support only if there is 3 pins RGB support in the motherboard or else you cant control the ARGB fans with motherboard software. If not you can control the fans using the given RGB remote controller
MAGNETIC DUST FILTERS
It has magnetic dust filters on the top it can be easily removable and cleanable
|Motherboard Type||ATX, Micro-ATX, Mini-ITX|
|I/O Panel||USB 3.0 x 1, USB 2.0 x 2,HD Audio, Reset|
|Drive Bays||2 x 3. 5 Inch HDD,2 x 2.5 Inch SSD, No ODD|
|Pre-Installed Fans||Front: 3 x 120mm ARGB Fans, Rear 1 x 120mm ARGB Fan|
|Tempered Glass Panel||Side|
|Fan Support||Front:3 x 120,2 x 140, Top:2 x 120, Rear 1 x 120mm and on bottom PSU Cover 2 x 120mm|
|RGB Controller||It supports up to 10 fans with RGB Header and Remote controller|
|Radiator Support||Front: 120/240,Rear: 120mm|
|Maximum CPU Cooler Height||160 mm|
|Maximum VGA Card Length||315 mm|